Skip to content
English
  • There are no suggestions because the search field is empty.

Barcode Scanner not Scanning

If the scanning is not capturing the data (i.e. students, employees), here are some possible causes:

1. Your scanner is not including the Enter key automatically.

2. Make sure the cursor is in the field being scanned (i.e. student code box in the POS window).

3. The quality of the scanned document is not clear enough for the scanner to read.

4. If using barcodes from a previous year, it could be a print degradation issue.  Have the barcodes become 

smudged or otherwise compromised?

5. Try downloading the PDF and then printing.  Sometimes printing directly from the PDF can cause character 

alterations.

6. It normally works best using a laser printer with a good quality paper or bar code label paper.  Labels printed using 

Inkjet printers may not be as crisp. 

7. You can try to do a higher resolution copy of the barcode report on high quality paper. Reset the scanner 

back to default, just in case the settings got changed. Default should automatically include Enter.

8. Try scanning a student's barcode into something like Notepad to see if the scanner works that way.  It should 

show the correct output (i.e. student code).  Start scanning IDs watching to see what appears on the screen after each 

beep of the scanner. If the scanner beeps and nothing shows in Notepad or it beeps and what shows in Notepad is not 

an expected value, then that is a scanner issue. 

9. Make sure when printing the barcodes that they print the student codes with no extra characters.

10. Make sure scanner drivers are up-to-date, if applicable.

11. Try scanning in a different browser and/or computer.

12. Clear browser cache.

13. Make sure pop-ups are allowed.

14. Make sure the computer being used doesn't have any updates needing to be done.

15. If updates were done, make sure there weren't any changes that could be causing issues (i.e. extension).

16. If the scanner beeps multiple times before the student shows in the search field indicates an issue with the scanner.