Skip to content
English
  • There are no suggestions because the search field is empty.

Why is Sycamore is Logging Out/Timing Out?

Under the Site Admin Configuration page, check to see what your settings are for logging people off from inactivity. 

The default setting is 240 minutes, so we won't log users off until they have been inactive for 240 minutes.

 

Unless this is happening to everyone, then it is most likely an issue at the user's desktop computer.

 

Possible Issues:

1. Power Options is most often the issue. In the Control Panel, there are Power Options that control when the 

system goes to stand-by, turns the hard drive off, goes into hybernation or system stand-by, etc., which all 

affect you staying logged in.  Adjust the time the computer goes to sleep, or if the computer is locking-up 

when you step away.  When many computers go to sleep, they also cause the internet connection to sleep, 

and this will disrupt the disconnect of the Sycamore login.  

2. Settings on the NIC card (Network Card), or a domain policy if you log into a domain.  Check the Power 

Options first, then you probably need to talk to tech support at your school.  It could be timing out after 

non-activity.  An update to the driver could have reset the settings. If you aren't sure of the settings, find someone 

who this isn't happening to and then match settings.

3. Possible power settings for a PC. Go into the computer's control panel>Network and Internet>Network 

Connections>right-click on the adapter (how you connect to the internet) and choose Properties. Click on the 

Configure button, then on the Power Management tab. Uncheck "Allow the computer to turn off this device to 

save power."

4. Make sure the computer clock is correct and then make sure time zones are the same (on the computer and 

under Site Admin | Information).

5. If the issue is occurring with a machine with wireless connection, try changing to a wired connection to see if 

that solves the problem. If it does, settings on the wireless router need to be checked, or the router needs to 

be re-started.