How does the Safety Alert work?
'Safety Alerts' can be be initiated by any employee by simply clicking on the 'Safety Alert' icon in the header portion of the application. This will prompt the user for particular information regarding the type of 'Safety Alert' needed to be broadcasted. Once confirmed, a broadcast message will be delivered to each staff member (families and students do not receive the alert) in the form of a large yellow screen displayed in the middle of their screen with the specific 'Safety Alert' information. A siren will also be heard if speakers are connected and turned on. This can be used for lockdown situations, weather alerts or anything needing the immediate attention of your staff. When users confirm the notification, their name is listed under 'Communication | Safety Alerts.' This way, when a 'Safety Alert' is issued, someone will be able to see who all has received this information and acknowledged it.
Important: A 'Safety Alert' can only be delivered to users that are configured to use the IPAN: Instant Pass-A-Note system. Site Admin will be able to see which users are configured to use IPAN by viewing the school homepage. Any user with the standard PAN icon
will not be able to receive the 'Safety Alerts.' Only users that have the IPAN configured and have the IPAN icon
next to their name will receive the alerts. To verify who is set up properly, go to the School Homepage, The Today section (on right side), click on the Who's On tab. The PAN icons with a bold red outline means the user is on a computer that is set up properly for the IPANs to work (and the Safety Alert). This is a user configuration and can be set in the Pass-A-Note |Options area. If you have configured the IPAN feature and you are not seeing the red outlined IPAN icon, then most likely, ports 8080-8085 are blocked by your school. You will need to open these ports up on your firewall/router in order for us to send the alert.
To get the red outline for your PAN:
- Pass-A-Note| Options| Instant Notification needs to be checked.
- If you have Internet Explorer, you need to make sure it is set to allow javascript. The easiest way to do this is in Tools| Internet Options| Security tab| Trusted Sites| in Security Level for this zone, click on Custom Level...| then change to Medium-Low or Low. Make sure you select OK and Apply for these screens to save your settings.
Once an Alert is issued, you can go and see what teachers actually got the alert in Communication | Safety Alert. The list contains all teachers that were sent the alert, as they were the ones that were logged in at the time of the alert and were using IPAN. If the teacher simply clicked on the 'red X' to close the window, their name would be left unchecked. If a teacher clicks on the 'Dismiss' button, then they get a check by their name.
When an Alert is sent, you are directed to a web page with an embedded *WAV file, so if you are receiving the Audio portion of the Alert, make sure that speakers are on and working properly, that your WAV file volume is turned up (typically a separate volume setting) and that no other program is blocking WAV files...like a security program, such as: McAfee, Symantec, Norton, ZoneAlarm, Comodo Firewall, Avast, etc.
If an alert is sent but the staff person does not hear the audio portion, make sure that:
- PAN| Options Instant Notification and Audio Alert boxes are checked.
- Speakers are on and working properly.
- WAV file volume is turned up in your Control Panel Sound controls (typically a separate volume setting). On a PC, double-click on the speaker button at the bottom-right screen, a window pops up and there is a Wave volume option that you can adjust. If you don't see the Wave option, go to Options and check the box next to Wave to display that volume setting.
- No other program is blocking WAV files (e.g. a security program such as McAfee, Symantec, Norton, ZoneAlarm, Comodo Firewall, Avast, etc.).